Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
- 10. Brake system
   10.1.2. Brake Pads forward brakes
   10.1.3. Brake Pads back brakes
   10.1.4. The general adjustment of back brakes (Girling)
   10.1.5. Replacement brake колодок (all-wheel drive models)
   10.1.6. The general adjustment of back brakes (Girling) (all-wheel drive models)
   10.1.7. Plugs of pedals of a brake and coupling
   10.1.8. Adjustment of a manual brake
   10.1.9. Removal of the lever of a manual brake
   + 10.2. Hydraulic components
   - 10.3. Antiblocking system of brakes
      10.3.2. The hydraulic pump
      10.3.3. The electronic block of management
      - 10.3.4. Elements ABS of a forward wheel
         10.3.4.1. Gauges of speed of rotation of forward wheels
      + 10.3.5. Elements ABS of back brakes
      10.3.6. Broad-brush observations on repair
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment





10.3.4. Elements ABS of a forward wheel
THE GENERAL DATA

Elements ABS of a forward wheel (models till January, 1989)

1. The rubber plug
Insert into an arm
2. The SHRUS with a rotor
The external SHRUS is on sale as spare honour with the established rotor
Put glue D6 on a junction of a semiaxis and a wheel nave
3. The gauge of speed
4. A sealing ring
Always replace
5. 10 Н.м.
6. Самоконтрящаяся a nut
The moment of an inhaling 265 Н.м.
Always replace
Twist and turn off only when the car costs on the earth
At a twisting put glue D6 on a carving
7. A rack of the bearing of a nave of a wheel
Is on sale as the spare part with the established plug for fastening of the gauge of speed
8. An arm
For fastening of wires
9. 10 Н.м.

Elements ABS of forward brakes (models after January, 1989)

1. Полуось and the SHRUS
Is on sale as the spare part with
The established rotor
Does not stick together with a wheel nave
The number of teeths on a rotor is reduced to half
In comparison with old updating
A little get the gauge of speed before semiaxis removal
2. The gauge of speed of rotation of a wheel is identical for
The left and right parties
For removal: simply pull out it from a nest
For installation: establish fingers against the stop
3. The fixing plug
For installation: grease with a liquid of the brake
The cylinder also establish in a nest of a rack of the bearing of a nave against the stop
4. 200 Н.м.
After a twisting till the demanded moment of an inhaling turn in addition on a turn quarter (90о)
Always replace
Twist / turn off only when the car costs on the earth
5. A rack of the bearing of a nave
Is on sale as the spare part with an aperture for installation of the fixing plug and the gauge of speed