Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
- 10. Brake system
   10.1.2. Brake Pads forward brakes
   10.1.3. Brake Pads back brakes
   10.1.4. The general adjustment of back brakes (Girling)
   10.1.5. Replacement brake колодок (all-wheel drive models)
   10.1.6. The general adjustment of back brakes (Girling) (all-wheel drive models)
   10.1.7. Plugs of pedals of a brake and coupling
   10.1.8. Adjustment of a manual brake
   10.1.9. Removal of the lever of a manual brake
   + 10.2. Hydraulic components
   - 10.3. Antiblocking system of brakes
      10.3.2. The hydraulic pump
      10.3.3. The electronic block of management
      + 10.3.4. Elements ABS of a forward wheel
      - 10.3.5. Elements ABS of back brakes
         10.3.5.1. Gauges of speed of rotation of back wheels
      10.3.6. Broad-brush observations on repair
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment





10.3.5. Elements ABS of back brakes
THE GENERAL DATA

Elements ABS of back brakes (models till January, 1989)

1. The gauge of speed of rotation of a wheel grease with a liquid of the brake cylinder before installation
Check up a free wheeling of the bearing of a nave of a wheel and adjust it if it is necessary, before gauge installation
2. The back bridge
Is on sale as the spare part with установпенной the plug for fastening of the gauge of speed
3. An arm for fastening of wires
It is attached to the suspension bracket lever
4. 10 Н.м.
5. A rotor
Remove gradually, inserting оправку into apertures of a nave of a wheel

6. A wheel nave
7. The bearing of a nave of a wheel
8. Шплинт
9. Oil a cap
10. A nut
11. A persistent washer
12. An internal holder of the bearing of a nave of a wheel
13. 30 Н.м.
14. A pin of a nave of a wheel
15. 10 Н.м.
16. Уплотнительнов a ring always replace

Elements ABS of back brakes (models after January, 1989)

1. The back bridge
Is on sale in quality заласной parts with the established plug for fastening
The gauge of speed
2. An arm for fastening of wires лрикрепив them to the suspension bracket lever
3. 10 Н.м.
4. A rotor
Remove gradually, inserting оправку into apertures of a nave of a wheel
5. A wheel nave
6. An internal holder of the bearing of a nave of a wheel
7. A persistent washer
8. Шплинт
Always replace
9. A lock ring
10. An oil cap
11. A nut
12. The bearing of a nave of a wheel
13. 30 Н.м.
14. A grjazezashchitnyj guard
15. A pin of a nave of a wheel
16. The fixing plug
For installation: grease with a liquid of the brake cylinder and insert into a rack nest against the stop
17. The gauge of speed of rotation of a wheel
It is identical to the left and right parties
For removal simply pull out it from a nest
For installation check up a bearing free wheeling сгтицы wheels and adjust it if it is necessary, before gauge installation
Insert into a nest fingers against the stop

Elements ABS of back brakes (all-wheel drive models, release till January, 1989 of release)

1. A rack of the bearing of a nave of a wheel
Is on sale as the spare it is frequent with the established plug for strengthening of the gauge of speed
2. Самоконтрящаяся a nut.
The inhaling moment: 320 Н.м.
Always replace
Twist and turn off, only when the car costs on the earth
Put glue D6 on a nut carving at its installation
3. 10 Н.м.
4. A sealing ring
Always replace
5. The gauge of speed
6. Полуось, the SHRUS and a rotor
The external SHRUS is on sale as the spare part with the established rotor

Elements ABS of back brakes (all-wheel drive models, release since January, 1989 of release)

1. Полуось, the SHRUS and a rotor
Is on sale as spare often established rotor
полуось does not stick together with a wheel nave
The number of teeths on a rotor is reduced by half in comparison with old updating
A little get the gauge of speed before removal of a semiaxis from a wheel nave
2. A rack of the bearing of a nave of a wheel
Is on sale as the spare part with a nest for installation of the plug and the gauge of speed
3. 120 H.м.
Always replace
Post of a twisting till the demanded moment of an inhaling turn дололнительно on a turn quarter (90 °)
Twist and turn off, only when the car costs on the earth
4. The fixing plug
For installation: grease with a brake liquid and establish in a rack nest against the stop
5. The gauge of speed
It is identical to the left and right parties
For removal, simply get it from a nest
For installation: establish in a nest fingers against the stop








бизнес иммиграция в сша