Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment





12.10. A back door (Compartment model)
THE GENERAL DATA

Back door in assemblage (Compartment model)

1. A shestigrannaja nut, 8 Н.м.
2. A zapornaja plate; has the contact switch of a lantern of a luggage carrier
3. A bolt with a flat head and a washer, 4 Н.м.
4. An adjusting washer
5. A condensing lining
6. A lock washer
7. The hinge
8. A lining
9. A shestigrannaja nut, 21 Н.м.
10. The basis
11. A hinge axis
12. A washer
13. A bolt, 10 Н.м.
14. A gazonapolnennaja rack
15. A clip, 10 Н.м.
16. A bolt; onboard a body
17. A washer; onboard a body
18. A sealing ring; onboard a body
19. A clip; on a body boat

Back door, removal (Compartment model)

PERFORMANCE ORDER
1) remove a decorative covering from a frame of a back part of a roof
2) remove a decorative covering of a back door
3) disconnect a screen wiper of back glass
4) remove a plait of wires from a back door
5) extend a block cable connector of a screen wiper of back glass from a cavity
The prevention

For simplification of installation of the flexible pipeline of a washer, attach it to a back door a wire.


6) disconnect a jet of a washer and remove the pipeline

Back door, installation (Compartment model)

Installation carry out upside-down.

Back door, assemblage

1. A condensing lining of a groove of a window
Removal is possible only at removed from a door скобе
2. 8 Н.м.
3. A condensing lining
It is fixed by means of universal glue АКD 476 КD5 05
4. A door covering
5. An extending clamp
6. Shock-proof armature
7. 8 Н.м.
8. The bottom loop of the lock with the terminator of opening of a door
9. The top loop of a door
10. 30 Н.м.
11. An overlay of a groove of a door
Only on models Audi-90
For removal pull out from the top part of an upholstery of a door
Installation: clear a groove by means of a cleaner
Place in a groove герметизирующее substance in the thickness of 3.0 mm
Establish an overlay on a covering of a door and press on it for installation in corresponding position

Lateral part of a body

Arrangement of elements


PERFORMANCE ORDER
1) press on 1 against the stop
2) tighten the screw 2 with internal шестигранником 0.4 Н.м.
3) close the hatch for installation of all components in initial position
4) tighten the screw with internal шестигранником 6 Н.м.

Back door, adjustment

Arrangement of elements


PERFORMANCE ORDER
1) adjust запорную a plate 1 to and = 12.0±1.0 mm
2) tighten 2 with the moment 0.4 Н.м.
3) close a back door for installation of all components in initial position
4) open a back door and tighten 2 with the moment 6 Н.м.

The lock of a back door, assemblage (Compartment model)

1. A zapornaja plate
Contains the contact switch of a lantern of a luggage carrier
Adjustment: place запорную a plate in the centre and tighten with the moment 0.8 Н.м.
Close a luggage carrier for a centering and alignment запорной plates
Slightly slightly open and tighten шестигранные nuts of a shock plate
2. A shestigrannaja nut, 8 Н.м.
3. Draught of lever transfer
Do not establish with a tension; the maximum free wheeling of 2.0 mm
4. The transitive plug
5. The plug
6. A lining
7. The plug
Displace it for fastening of draught of lever transfer
8. A shestigrannaja nut, 4 Н.м.
9. The lock cylinder
10. The lock
11. A shestigrannaja nut, 8 Н.м.








бизнес иммиграция в сша