Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment





12.11. A forward door, the bottom door loop
THE GENERAL DATA

Forward door in assemblage

1. An overlay of a groove of a door
Only on models Audi-90
For removal pull out from the top part of an upholstery of a door
2. A condensing lining, back
3. An adjusting washer
4. A bolt, 8 Н.м.
5. Shock-proof брусок
6. A door covering
7. Extending clamps
8. A bolt, 8 Н.м.
9. A door loop, bottom, with the terminator of opening of a door
10. A bolt, 30 Н.м.
11. The plug with cutting
12. A door loop, top
13. A bolt, 30 Н.м.
14. A sealant of a window groove, external
Removal is possible only under condition of removal of the holder of a window
15. A condensing lining, forward

Forward door, removal

PERFORMANCE ORDER
Unscrew bolts with шестигранной (arrow) head


Installation

Installation carry out upside-down, in view of the following:

PERFORMANCE ORDER
1) establish bolts with шестигранной a head
2) put greasing AOS 126 000 05 or equivalent on the specified places of the bottom door loop

Forward door in assemblage (Compartment model)

1. A sealant of a window groove
Removal is possible тольуко under condition of removal of the holder of a window
2. An extending clamp
3. Shock-proof брусок
4. A bolt with шестигранной a head
5. The plug
6. A door loop, with the terminator of opening of a door
7. A door loop, top
8. A bolt with шестигранной a head, 40 Н.м.
9. A door

Forward door, removal

PERFORMANCE ORDER
Disconnect electric wires of a regulator of a window, door-locks and a mirror

Forward door, installation

Installation carry out upside-down.


PERFORMANCE ORDER
1) level and adjust a door
2) check up and adjust, as it is necessary, a window regulator
3) connect all electric wires and sockets
4) check up, how much correctly function window lifter, mirrors and door-locks
5) put greasing AOS 126 000 05 or its equivalent on the specified places (arrow) of the bottom door loop

Forward door, replacement

Since VIN 8B MA 008 401, the door covering has been changed. Therefore as the spare part the doors executed in new style will be accessible only. At installation of a new door on the old car, it is necessary to make also installation or replacement of following details:

1 – the decorative door panel;
2 – a window regulator;
3 – an external door condensing lining;
4 – a flat nut / a washer;
5 – a cover of the decorative panel;
6 – a basis of the holder of an external mirror.








бизнес иммиграция в сша