Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment





12.2. The central section of a guard

Removal
PERFORMANCE ORDER
1) remove a bumper
2) remove a radiator lattice
3) remove the decorative panel
4) pull out a guard from condensing rings

Installation

Installation carry out upside-down:
PERFORMANCE ORDER
1) unscrew an air line of cooling air and fastening from a radiator above
2) remove the central section of a guard

Forward guard, removal

PERFORMANCE ORDER
1) remove a bumper
2) remove a radiator lattice
3) unscrew the decorative panel (arrows)
4) pull out a guard from a condensing ring to the right or to the left

Forward guard, Sedan


1. A bolt with шестигранной a head, 23 Н.м.
2. The self-cutting screw, 7.5 Н.м.
3. A guard, the bottom section
It is possible to remove together with the central section
4. The self-cutting screw, 7.5 Н.м.
5. A bolt with шестигранной a head, 23 Н.м.
6. A bearing plate of the lock, it is possible to remove together with the central or bottom section
7. A metal ear, at guard removal pull it directly downwards for a corner
8. The self-cutting screw, 7.5 Н.м.
9. A guard, the central section

Forward guard, removal for model the Sedan

PERFORMANCE ORDER
1) through an aperture for access remove the holder of a rope and disconnect a rope
2) unscrew casing screws приточного air (arrow)
3) to remove a guard, pull it downwards under a wing

Forward guard, installation

Installation carry out upside-down.

Forward wing, removal
PERFORMANCE ORDER
1) remove a forward bumper
2) remove a lining of a cavity of a wheel
3) remove condensing lining (marksman)

Forward wing, removal. Adjustment of a forward wing, a cowl backlash
PERFORMANCE ORDER
Unscrew fixing bolts and self-cutting screws

Forward wing, installation

Installation spend upside-down. Pay attention to the following:

PERFORMANCE ORDER
1) establish a rivet for a basic arm of a cowl (the marksman
2) establish a rivet for a door stopper (the marksman
3) establish strips of a sealing cord, 1, 2 and a sheet lining with a bolt And on a stopper

1 = 480 mm at length and 7.0 mm in diameter

2 = 250 mm at length and 7.0 mm in diameter


The prevention

The sealing cord will be necessary for compressing till the diameter in 7.0 mm


Adjustment of a forward wing, cowl backlash

PERFORMANCE ORDER
1) ослабьте all bolts of a wing
2) having weakened bolts, adjust a backlash, moving a wing

And = 4.5 + 1.0 mm

Forward guard in gathering for Compartment models

1. A bolt with шестигранной a head, 23 Н.м.
2. The self-cutting screw with a washer
3. A guard, the central section
4. A guard, the bottom section
5. The self-cutting screw with a washer

Forward guard, removal for Compartment model

PERFORMANCE ORDER
1) remove a bumper
2) remove a radiator lattice
3) disconnect a cowl rope
4) unscrew screws of a decorative covering (arrow) and pull out it from a condensing ring
5) unscrew an air line of cooling air and an arm of a radiator (arrow)
6) unscrew an arm of an oil radiator
7) disconnect the switch of a lantern of motor branch
8) disconnect a connecting loop on the guard panel
9) unscrew directing device of soaked up air (arrow)

Cowl rope, detachment for model the Sedan

PERFORMANCE ORDER
1) through an aperture for access remove the holder of a rope and disconnect a rope
2) unscrew casing screws приточного air (arrow)
3) through an aperture for access disconnect the holder of a rope 1
4) disconnect a rope from an arm 2

Forward guard, installation. The central section of a guard, removal / installation for Compartment model

PERFORMANCE ORDER
To remove a guard, pull it downwards under a wing (marksman)

Forward guard, installation

Installation carry out upside-down.

The central section of a guard, removal

PERFORMANCE ORDER
1) remove a bumper
2) remove a radiator lattice
3) disconnect a cowl rope
4) unscrew screws of a decorative covering (arrow) and pull out it from a condensing ring
5) unscrew an air line of cooling air and an arm of a radiator (arrow)
6) unscrew and remove the central section of a guard

The central section of a guard, installation

Installation carry out upside-down.








бизнес иммиграция в сша