Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment





12.26. Door glass (Compartment model) Removal

PERFORMANCE ORDER
1) completely lift a windowpane
2) note glass position in relation to a frame and the holder, as is shown in (insert) drawing

1 – the central rack of a body, top

2 – the central rack of a body, position on the holder

3 – a forward rack of a body, position on the holder

3) half lower a window
4) ослабьте bolts on the holder
5) remove aluminium clamping overlays with sealants
6) remove glass

Installation

The prevention

On cars with identification number to 8BKA 008300 black plastic substrate should be replaced with a white plastic substrate.


PERFORMANCE ORDER
1) place in the set position a plastic substrate
2) place in the set position has flown down and combine it with marks in a frame and the holder; if original glass is lost or broken, at first place glass between carving apertures
3) cautiously insert glass in the holder, forward and back
4) establish a plastic substrate
5) establish aluminium clamping overlays
6) manually screw up bolts
7) arrange the back holder (from outside the central rack of a body) in parallel directing
8) by means of a wrench pull downwards (marksman) while the spring on a rope will not be compressed completely
9) completely tighten bolts