Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
- 12. A body, salon
   12.2. The central section of a guard
   12.3. A cowl rope
   12.4. A forward guard
   12.5. A forward wing
   12.6. Lock pins of a cowl, the rubber shock-absorber
   12.7. A cowl
   12.8. A gazonapolnennaja rack (models the Sedan)
   12.9. A luggage carrier cover
   12.10. A back door (Compartment model)
   12.11. A forward door, the bottom door loop
   12.12. Adjustment of a window and a bearing element of a door
   12.13. Window condensing stoppers, a window regulator
   12.14. The door lock
   12.15. Draught of lever transfer of the lock
   12.16. A rope of an internal door-lock
   12.17. A rotary clamp, an adjusting spring
   12.18. Adjustment of doors
   12.19. A bearing element of a door
   12.20. The central lock
   12.21. The pump with two modes of forcing
   12.22. The leading activator
   12.23. The activator of a back door
   12.24. The activator of a cover of a luggage carrier
   12.25. The activator of a cover of a fuel tank
   12.26. Door glass (Compartment model)
   12.27. Adjustment of a butt overlay (Compartment model)
   12.28. A skeleton of a back door, the bottom loop of a door
   12.29. A bearing element of the back door, a condensing stopper
   12.30. A rope, шарнирный the lever
   12.31. The door handle
   12.32. The holder of components of a door
   12.33. The hatch
   12.34. A bumper casing
   12.35. Hermetic sealing of a back bumper
   12.36. An extending clamp
   12.37. A forward spoiler / a lining of a niche of a wheel (Compartment model)
   12.38. The top overlay of a forward spoiler (Compartment model)
   12.39. A back spoiler / a lining of a niche of a wheel
   12.40. A back bumper (Compartment model)
   12.41. window raiser
   12.42. Internal furnish of a body
   12.43. Sitting
+ 13. A central air
+ 14. An electric equipment





12.9. A luggage carrier cover
THE GENERAL DATA

Luggage carrier cover, the hinge, rack (models the Sedan)

1. The terminator of a cover of a luggage carrier
2. The sharnirnyj terminator, in the closed position
3. An izoljatsionnaja washer
4. A combinational bolt, 21 Н.м.
5. A fixing clip
6. A gazonapolnennaja rack
7. A shestigrannaja nut, 21 Н.м.

Luggage carrier cover, adjusting backlash

Placing of the sizes


The size
Adjustment
And = 4.4 + 1.0 mm
Regulate the hinge
b = 6.5 + 1.0 mm
Adjustment it is carried out at change of the triangular panel
With = 9.9 + 1.0 mm
It is regulated by displacement of stoplights
d = 8.0 + 1.0 mm
е = 9.75 + 1.0 mm
Adjustment is made on запорной to a plate of a cover of a luggage carrier

The zapornyj mechanism of a cover of a luggage carrier in assemblage (model the Sedan)


1. A sealing ring for the lock cylinder
2. Draught of lever transfer
Adjustment: place the lock and the lock cylinder so that in draught рачажной transfers were not a free wheeling; fix draught of lever transfer on the lock and fix
3. The jointed plug
4. A spring washer
5. A bolt with шестигранной a head
6 Н.м.
6. A spring pin
7. The clown
Remove cautiously not to lose a spring ball
8. A bolt with шестигранной a head
3 Н.м.
9. A washer
10. A zapornaja plate of a door-lock
11. A sealant, tear off a lining and paste on a shock plate of a door-lock
12. A counternut, 3 Н.м.
13. The lock
14. A sealant, tear off a lining and paste on the lock
15. The lock cylinder
For removal pull out a spring pin, remove the clown and by means of a key squeeze out the lock cylinder
16. A sealing ring
17. The lock
18. A spring
19. A spring ball, cover with its greasing before installation in the lock cylinder








бизнес иммиграция в сша