Since 1986-1991 of release
Repair and car operation
- 1.2. Car identification
1. The maintenance instruction
1.3. An arrangement of identification tablets
1.4. The panel of devices
+ 1.5. Car service
- 1.6. Independent service of the car
1.6.2. A small-sized spare wheel
1.6.3. Wheel replacement
+ 1.6.4. Safety locks
- 1.6.5. Replacement of bulbs
188.8.131.52. Headlights of forward light
184.108.40.206. Forward indexes of turns and dimensional fires
220.127.116.11. A back block headlight on a back wing
18.104.22.168. The central stoplight on back glass
22.214.171.124. Back antifog headlights and tail light headlights in a luggage carrier cover
126.96.36.199. Bulbs of illumination of licence plate
188.8.131.52. A back lateral dimensional lantern
184.108.40.206. A plafond of illumination of salon
220.127.116.11. Bulbs for reading of cards
18.104.22.168. Antifog headlights
22.214.171.124. A lantern of illumination of an impellent compartment
126.96.36.199. A lantern of illumination of a luggage carrier
1.6.6. Radio tape recorder replacement
1.6.7. Car lifting
1.6.8. The general rules of towage
+ 1.7. Specifications
1.9. The sizes
1.11. The schedule of preventive servicing / of greasing of the car
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment
Open a luggage carrier cover.
Unscrew screws with a head under a crosswise screw-driver.
Remove a casing of a headlight by means of a flat edge of a screw-driver.
Accurately press a bulb into a cartridge, turn it counter-clockwise and get.
Establish a new bulb.
Insert a cartridge with a bulb into place and turn it clockwise against the stop.
Establish into place a casing and fix it by means of the screw with a head under a crosswise screw-driver.