Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
- 7. Ignition system
   7.1.2. Specifications (4-cylinder models)
   7.1.3. Components of system of ignition for 5-cylinder models
   7.1.4. Specifications (5-cylinder models)
   7.1.5. The block of management CIS-E Motronic (the alarm block)
   7.1.6. A distributor rotor
   7.1.7. The ignition distributor (4-cylinder models)
   7.1.8. The ignition distributor (5-cylinder models)
   7.1.9. Components of system of ignition for 20-klapannyh models
   7.1.10. Specifications (20-klapannye models)
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment





7.1.2. Specifications (4-cylinder models)
THE GENERAL DATA

The prevention

The number of turns of idling, installation of a corner of an advancing of ignition and the maintenance WITH are interconnected and should be checked and be regulated together.


System type toplivopodachi/ignitions
CIS-E Motronic
CIS-E Motronic (the combined system toplivopodachi/ignitions)
893 907 404
The ignition distributor
053 905 205А
Restriction of number of rpm (the top limit) (through the block of management CIS-E Motronic)
6400 100 rpm
Installation of a corner of an advancing of ignition:
 – Verifying value
4 – 8 before the top dead point
 – Adjusting value
6 1 before the top dead point
Operating procedure of cylinders
1–3–4–2
Spark plugs
  – Bosch
W7DTC
 – An interelectrode backlash
0.8 0.1 mm
 – The inhaling moment
20 Н.м.
Number of turns of idling (is not regulated, copes system of stabilisation of idling)
840 60 rpm
The maintenance WITH (in a tube for measurement WITH, the oxygen gauge is connected)
0.3 – 1.2 about. % adjustment is carried out by means of current adjustment of a regulator of pressure difference)