Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
- 9. Suspension brackets, wheels
   9.1.1. Elimination of a resonance / of vibration of a cross-beam (4-cylinder models)
   9.1.2. Change of a design of a forward suspension bracket
   9.1.3. Полуось
   9.1.4. A suspension bracket rack
   9.1.5. SHRUS
   9.1.6. A suspension bracket rack (all-wheel drive models)
   9.1.7. SHRUS (all-wheel drive models)
   + 9.2. A back suspension bracket
   + 9.3. Wheels and tyres
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment





9.1.2. Change of a design of a forward suspension bracket
THE GENERAL DATA

Change of a design of a forward suspension bracket of the models which are let out since 1990

1. A rack of the bearing of a nave of a wheel and the shock-absorber
With a uvula for fastening of connecting draught of the stabilizer of cross-section stability
The modified shock-absorbers are established
2. 45. Н.м.
3. Connecting draught
4. 45 Н.м.
Always replace
5. The lever of a forward suspension bracket
It is modified for the purpose of removal of fastening of connecting draught
6. A cross-beam of a forward suspension bracket

7. The stabilizer of cross-section stability
It is modified
8. The rubber plug
There are plugs of various diameters depending on diameter of the stabilizer
9. A clip
It is modified
10. 35 Н.м.
Always replace
Twist, only when the car costs on the earth


The prevention

The modified elements of a suspension bracket cannot be established on cars of old models.


Change of a design of a forward suspension bracket of the models which are let out since 1990

1. The plug
2. The suspension bracket lever
Suspension bracket levers differ for the left and right parties
3. A bolt
Establish in the suspension bracket lever against the stop

4. The spherical hinge
Spherical hinges differ for the left and right parties
Trailer diameter = 19.0 mm
Do not expand a nest in a rack of the bearing of a nave of a wheel at removal / to installation
Adjust disorder of forward wheels after installation
5. A washer
6. 65 Н.м.

The prevention

The modified elements of a suspension bracket cannot be established on cars of old models.









бизнес иммиграция в сша